Metallic & fabric expansion bellows
All joints are manufactured to order in the sizes, materials and movement ratings required by the line. Sizes and material grades on request.
Metallic Bellows
Thin-wall stainless steel bellows elements with flanges, weld ends, tie rods, liners and covers as required by the application.
Axial Expansion Joint
Axial movement · Anchored runsSingle bellows joint absorbing axial movement caused by thermal growth in straight pipe runs.
Universal Joint
Lateral + axial · Twin bellowsTwin bellows separated by a centre spool to absorb large lateral and combined movements.
Hinge Joint
Angular rotation · Single planeHinged pairs designed to take angular rotation in a single plane on pressurised lines.
Slip Type Expansion Joint
High axial travel · Packed glandTelescopic sleeve joint with packing for high axial travel on steam and hot water lines.
Octagonal Expansion Joint
Duct sections · Low pressureOctagonal cross-section joints for ducting and non-circular gas paths.
Rectangular Expansion Joint
Rectangular ducts · Low pressureRectangular cross-section metallic joints for ducting and flue gas paths.
Dismantling Expansion Joint
Maintenance access · AdjustableAdjustable-length joint built for maintenance access and pipe removal.
Fabric Bellows
Multi-layer fabric expansion joints for low pressure air and gas ducting, supplied with frames, belts and insulation packs.
Rectangular Fabric Bellows
Rectangular · DuctingMulti-layer fabric belts with insulation and steel frames for rectangular ducting on boilers, ESPs and air paths.
Circular Fabric Bellows
Circular · Fans and gas ductsCircular fabric joints for fans, blowers and gas ducts where high movement and low spring rate are required.
Fabrication & Engineering
Welding, structural fabrication and engineered components made to order from our in-house plant.
Welding Service
Argon · MIG · ArcArgon (TIG), MIG and Arc welding job work on structural, pipe and sheet-metal components, carried out in-house to drawing with fit-up and finish checks.
U Clamp
Stainless steel · Made to sizeStainless steel U clamps and U bolt clamps formed to size for pipe lines, ducts and structural fixing.
Shed Fabrication Service
Sheds · MS structuresShed fabrication and MS structure fabrication — columns, rafters, purlins and bracing — made to customer drawings.
Long Dia Flanges
Large diameter · Rolled and weldedLarge-diameter flanges rolled and welded to size for ducts, tanks and expansion joint ends.
Which joint suits your line?
| Joint type | Movement absorbed | Typical use | Notes |
|---|---|---|---|
| Axial Expansion Joint | Axial compression / extension | Straight pipe runs between anchors | Single bellows; pipe must be guided and anchored |
| Universal Joint | Lateral and axial, combined | Large lateral offsets in a pipe run | Twin bellows with centre spool |
| Hinge Joint | Angular rotation in one plane | Pressurised lines, used in pairs or sets | Hinges carry the pressure thrust |
| Slip Type Expansion Joint | High axial travel | Steam and hot-water lines | Telescopic sleeve with packed gland |
| Octagonal Expansion Joint | Duct movement | Ducting and non-circular gas paths | Low pressure |
| Rectangular Expansion Joint | Duct movement | Rectangular ducts and flue-gas paths | Low pressure |
| Dismantling Expansion Joint | Adjustable length | Maintenance access and pipe removal | Adjustable-length design |
| Rectangular Fabric Bellows | High movement, low spring rate | Boilers, ESPs and air paths | Multi-layer fabric with steel frames, belts and insulation |
| Circular Fabric Bellows | High movement, low spring rate | Fans, blowers and gas ducts | Multi-layer fabric; low pressure |
Sizes, materials and pressure / temperature ratings are finalised for each application. Send us your line data and we will recommend the joint type.
Details we need from you
| Detail | What to send |
|---|---|
| Size | Pipe diameter, or duct width × height and length |
| Design pressure | Operating and test pressure of the line |
| Temperature | Operating and maximum temperature |
| Media | Steam, water, air, flue gas, chemicals or other |
| Movement | Axial, lateral and angular movement to absorb |
| End connections | Flange standard and rating, or weld ends |
| Material | Preferred grade for bellows, flanges and covers |
| Quantity & drawing | Quantity, plus a drawing or sample if available |
Not sure about a value? Send what you have, or a drawing or sample, and we will work out the rest with you.
