About the company

Engineering firm built around bellows fabrication

Laleeta Engineering is a manufacturing company based at Por, Vadodara, producing metallic expansion joints and fabric bellows for process piping and ducting systems. The unit operates from a 10000 Sq.ft. manufacturing plant equipped for the complete cycle of bellows work.

Work is carried out to customer drawings and site conditions — movement, pressure, temperature and media are reviewed before a joint type is finalised. Because press, rolling, forming and welding are all in-house, dimensional control stays with us at every stage.

Enquiries and technical discussions are handled directly by Mr Rajesh Nishad, so customers speak to the person who follows the job through the shop.

We make axial, universal, hinge, slip type, octagonal, rectangular and dismantling expansion joints in metal, along with rectangular and circular fabric bellows. Metallic joints are supplied with flanges, weld ends, tie rods, liners and covers, and fabric bellows with frames, belts and insulation packs, as the application requires. Sizes, materials and movement ratings are made to suit your line, and replacement joints can be matched from a sample or an old drawing. Send us your drawing or sample and we reply on the same working day wherever possible.

CompanyLaleeta Engineering
GSTIN24BVHPK9800K1ZD
Plant area10000 Sq.ft.
Contact personMr Rajesh Nishad
Address68, Atmiya Brookfieldz Industrial Park, Beside Wago, In Front of CPP, Untiya, Por, Vadodara - 391243
Laleeta Engineering plant entrance Por, Vadodara
Inside the Laleeta plant Inside our plant

Manufacturing capabilities

01

Press machines

Blanking, piercing and forming of flange plates, liners and bellows components to drawing.

02

Rolling machines

Plate, pipe and angle rolling and bending for circular shells, sleeves, long diameter flanges and rings used in expansion joints.

03

Forming machines

Convolution forming of thin-wall bellows elements in stainless steel and alloys.

04

Welding machines

Argon (TIG), MIG and Arc welding of longitudinal seams, flanges, structures and reinforcement with full fit-up control.

Quality

Quality & inspection

One plant, one team: dimensions and fit-up are controlled between stages instead of being found at the end.

01

Drawing and data review

Movement, pressure, temperature and media are reviewed before the joint type and material are finalised.

02

Stage-wise fit-up checks

Blanking, rolling, forming and welding happen in-house, so fit-up is checked to drawing between operations.

03

Weld and finish checks

Seams, flanges and reinforcement are checked for fit-up and finish before the joint is released.

04

Testing as you specify

If your job needs material certificates, a pressure test or other inspection, tell us at enquiry stage and we will confirm what can be provided in the quotation.